Blog Post 2.....Snap, Hook and Eye, Hook and Bar, Threading a Sewing Machine, Winding a Bobbin, Straight Stitch, Zig-Zag Stitch and Using an Industrial Iron



Here is the zig zag stitch....pretty easy be sure to back stitch on each end so that it will not unravel.......be sure to zig and not zag...yea..I know that was corny...lol





Straight Stitch down the center of the fabric, be sure to reverse stitch at each end so that it does not come undone.



Threading the bobbin and winding the bobbin by inserting thread through small bobbin hole and hold thread while thread is winding onto the bobbin.....insert the bobbin in the machine to the left ....





place thread on knob and run along the line and knob as shown in the next pic





Now we will thread to the needle so that the bobbin thread and sewing thread make a slip knot




Pull thread through and then thread needle and we are ready to sew a stitch or two.....






This is a snap the top pic is a male and the pic under it is female and they snap together and you pull thread throught the small hole you see I have gone through to attach the "SNAP"....

 

This is the hook and the bar...be sure to thread down the hook by wrapping the thread around that part so that it will stay in place.....